The Cantilever Rack Structure is the ideal solution for optimising stock efficiency and reducing your storage footprint. Perfect for external storage where factory and warehouse space is limited. Ideal for storing long and heavy items such as beams, profiles, pipes and timber.

Rack Clad Buildings offer a considerable saving against a traditionally-constructed building with racking purchased separately. Reduced construction time and limited ground preparation compared to traditional warehousing solutions, makes a Rack-Clad building a worthwhile investment. Increasing ROI and maximising available time, profit and space.

Benefits
• Security and weather protection for externally stored products
• Shorter supply and installation lead time compared to traditional buildings
• Fully modular system – easily extended, relocated or reduced
• Faster Installation Time | Reduced Construction Costs | Lower Operation Costs | Quick Lock Arms
• Low-Cost | Faster ROI | Minimum Ground Preparation
• Lower Insurance Premiums | Lower Ratable Value
• Maximise Storage Space | High storage capacity
• Temporary Warehousing Solution Manufactured to Permanent Building Regulations | Long or Short Term Solution

These structures are faster to erect and require a fraction of the ground preparation compared to traditional storage buildings. The structures are designed to be bolted onto solid concrete slabs, reducing construction time and cost.

NP Structures’ cantilever racking is designed to be more robust than conventional racking, due to its requirement to form part of the building’s structure.

Unique design features include heavy-duty click-fit connection arms, that are hooked vertically into the upright, creating a flexible position that does not require bolting in place. The hooking arms are designed for easier storage management and to prevent damage to the support arm and upright.

Clad in heavy-duty PVC-coated fabric, and featuring our unique StripFix® cladding system, the Pallet Rack Housing provides exceptional weather resistance for external storage applications.

Our unique StripFix® system allows the cover to be more effectively tensioned, protecting against weather damage and creating a drum-skin tight finish. Designed to be sheeted in 2m wide PVC strips which are slid into position and individually tensioned, this allows construction to be completed in all weather conditions faster and easier than as a single sheet. Individual strips allow cost-effective maintenance of your canopy and is easily repaired where required.

OPTIONAL EXTRAS

Cladding Options - Sides:
All steel sheet cladding

Cladding Options - Gables:
• Door Gable: Steel sheet cladding with PVC 'D' Panel, heavy-duty PVC wind-up door.
• Door Frame only option
• Rear Gable: Steel sheet cladding with PVC 'D' Panel.

Doors
Width: 4m
Height: 5m

VIDEO

TECHNICAL SPECIFICATIONS

Loading
Arm length= 1000mm & 1250mm
Max Load per arm= 1000kg

Maximum Total Column Load = 10,000kg
Single - 5,000kg 
Double - 10,000kg

Quality Assured
Our Racking systems comply to the following Standards:

• BS EN 1991-1-3:2003: General Actions, Snow Loads.
• NA to BS EN 1991-1-3:2003: UK National Annex to Eurocode 1: General Actions, Snow Loads.
• BS EN 1993-1-4:2005: General Actions, Wind Loads.
• NA to BS EN 1991-1-4:2005+A1:2010: UK National Annex to Eurocode 1: General Actions, Wind Actions.
• BS 7837:1996 (2015) and DIN 4102 (B1): Specification for flammability performance for textiles used in the construction of marquees and similar textile structures.
• Code of practice for the design and use of cantilever racking systems
• DESIGNED TO AND EXCEEDS FEM STANDARDS - On recent tests at the University of Salford - School of Science, Engineering & the Environment - Commercial Enterprise Unit, our racking arm not only met the FEM requirements but exceeded.

Product Overall Height Length Width Height to the Eaves Column Spacings  Column Finish Arm Finish Side Cladding

Covered Cantilever Racking

7.5m Starts from 6m in 2m increments 6.8m for
1 Bay

6m

2m

Powder Coated

Galvanised Steel

Powder Coated

Galvanised Steel

Corrugated Tin Sheeting



Design Features

NP Structures' Cantilever Racking offers unique design features such as our Easy-Click heavy-duty connection arms, that are hooked vertically into the upright, creating a flexible position that does not require bolting in place. The hooking arms are designed for easier storage management and to prevent damage to the support arm and uprights.

Although racking is adjustable, once the beams are slotted into position, an interlocking structure of great strength and rigidity is maintained.

The Easy-Click arms are easily configurable to adjust to different heights with a load capacity of 1000kg per arm. Pivoting arms prevent unnecessary damage caused to the framework that could occur when moving machinery.

Available in Galvanised Steel or Powder Coated Orange.

 

PHOTO GALLERY

      

NP Structures

Get in touch

  • You can also contact us on

    Opening times: Mon - Fri 8:30am - 5:00pm

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

  • You can also contact us on

    Opening times: Mon - Fri 8:30am - 5:00pm

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

  • You can also contact us on

    Opening times: Mon - Fri 8:30am - 5:00pm

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.